At present, the use of wire harness type connectors in today's society can be said to be everywhere, and it is indispensable in the field of electronic equipment. The requirements for the manufacturing and processing standards of wire harness type connectors are also very strict, then the wire harness type connector What undesirable factors will appear during the processing? The following is an explanation of the unfavorable factors that occur during the processing of the harness connector for everyone.


Harness type connector
The processing of the harness type connector is subject to the standard crimping process. The crimped type connector must be strictly tested for very stable performance, excellent mechanical performance, electrical performance and environmental performance to ensure the harness connection The device avoids the problem of poor contact or poor connection during the crimping process.

Some undesirable factors that occur during the processing of the harness connector:
1. After the crimping of the wire harness type connector, the appearance inspection and the circuit unobstructed inspection are required, and the inspection methods of different models are different.
2. The height of the closing of the harness type connector during crimping should be correct, the crimping connector must not have a wire end, and the air pressure should also be within the specified range.
3. Harness type connectors should meet the requirements of relevant application standards and specifications.
4. The depth of the crimping of the harness connector should also be paid attention to. Some people think that it only needs to be slightly touched. In fact, the depth of the different combinations is different. If you don’t pay attention, it will lead to unqualified and cause unnecessary consequences.